top of page

Hi-Rate Sand Filters

Hi-Rate Steel Commercial Permanent Media Filters

The Hi-Rate Filter concept employed in Eureka Manufacturing Company's HRL, HRL2C, and HRG Hi-Rate Permanent Media Filters has been refined and tested with thousands of systems successfully installed and operating throughout the world. This experience has tested the original premise of the design, making the Hi-Rate an effective, proven method of water filtration.

​

These filters are designed for and installed in large, commercial aquatic centers, public swimming pools, and commercial water parks.

​

Our Hi-Rate Permanent Media Filters are manufactured in sizes from 30 inches diameter up to 120 inches diameter. The filters are available in single and multi-vessel configurations, as well as with multiple cells inside a single vessel.

​

Our filters, in single or dual vessel configurations will service pools with total volumes ranging from 50,000 gallons up to 550,000 gallons. Flow ranges can be accommodated from 142 gpm up to 2,086 gpm. Larger pools or higher flow rates are also readily available.

Filter Types

HRL Single Vertical Hi-Rate Sand Filters

HRL Single Vertical Hi-Rate Sand Filters are single cell, single vessel permanent media filters. This is the most popular type of filter in our product line.

​

HRL Dual Vertical Hi-Rate Sand Filters

HRL Dual Vertical Hi-Rate Sand Filters consist of two single cell, single vessel permanent media filters joined together to increase the capacity of the filter system.

​

HRL Dual Cell Hi-Rate Sand Filters

HRL Dual Cell Hi-Rate Sand Filters are single vessels that contain two separate permanent media filter cells inside. These filters have high filter capacity, but take up relatively little square footage in an equipment room.

​

Contact us for product specifications or to locate your nearest dealer!

bottom of page